In Ihrem Warenkorb befinden sich keine Artikel
1x Ruß reinigen / (5171) LIQUI MOLY passt auf dein BMW 5 (F10) 530 d xDrive / 2011-03 - 2016-10
OE-Nummern
Dateien
Beschreibung
Liqui Moly 5171 Particulate Filter Cleaner 500ml Pro-Line Diesel Particulate Filter Flushing DPF 4100420028205 - 5171 - 4100420051715
Product Information:
For rinsing built-in diesel particulate filters (DPF/FAP) after cleaning with Pro-Line diesel particulate filter cleaner. Rinses off the soot dissolved by the cleaner and distributes it in the diesel particulate filter so that it can be burned by normal regeneration. The cleaner is neutralized by rinsing. Expensive repairs can be avoided by regular cleaning in combination with rinsing.
Instructions for use:
Cleaning is carried out with the DPF pressure cup gun (item no. 7946) and the specially developed DPF lance with 5 spray probes (item no. 7945). Depending on the vehicle type, provide access to the diesel particulate filter. For this purpose, remove the temperature or pressure sensor from the diesel particulate filter on most vehicles. Note: The temperature of the particle filter must be lower than 40 °C during cleaning. In some vehicles, the diesel particulate filter is not located at the bottom of the vehicle, but near the exhaust bend or possibly. of the exhaust gas turbo. For safety reasons, the utmost care must be taken when cleaning these vehicles so that no cleaning or flushing fluid enters the combustion chamber through an open exhaust valve.
Depending on the vehicle type, insert the appropriate Pro-Line spray probe into the particle filter through the resulting opening. Apply the entire amount of Pro-Line diesel particulate filter cleaner (1 l) at several intervals of 5-10 seconds, each time at 5-10 seconds. pause, spray directly onto the surface of the particle filter at a pressure of 6-8 bar. To moisten the entire surface as much as possible, rotate the probe and move it back and forth during cleaning. Allow the cleaner to work for approx. 15 minutes. Then rinse the particulate filter with the full amount of Pro-Line diesel particulate filter rinse (500 ml). This cleaning is also carried out with the DPF pressure cup gun at the same intervals as with the cleaning fluid. The cleaning dissolves the soot and distributes it in the particle filter to such an extent that it can be burned with normal regeneration. After reinstalling the sensor, the service company or workshop must initiate a regeneration according to the manufacturer's specifications.
Product Information:
For rinsing built-in diesel particulate filters (DPF/FAP) after cleaning with Pro-Line diesel particulate filter cleaner. Rinses off the soot dissolved by the cleaner and distributes it in the diesel particulate filter so that it can be burned by normal regeneration. The cleaner is neutralized by rinsing. Expensive repairs can be avoided by regular cleaning in combination with rinsing.
- guarantees low fuel consumption
- dissolves soot
- optimal engine power
- reduces operating costs
Instructions for use:
Cleaning is carried out with the DPF pressure cup gun (item no. 7946) and the specially developed DPF lance with 5 spray probes (item no. 7945). Depending on the vehicle type, provide access to the diesel particulate filter. For this purpose, remove the temperature or pressure sensor from the diesel particulate filter on most vehicles. Note: The temperature of the particle filter must be lower than 40 °C during cleaning. In some vehicles, the diesel particulate filter is not located at the bottom of the vehicle, but near the exhaust bend or possibly. of the exhaust gas turbo. For safety reasons, the utmost care must be taken when cleaning these vehicles so that no cleaning or flushing fluid enters the combustion chamber through an open exhaust valve.
Depending on the vehicle type, insert the appropriate Pro-Line spray probe into the particle filter through the resulting opening. Apply the entire amount of Pro-Line diesel particulate filter cleaner (1 l) at several intervals of 5-10 seconds, each time at 5-10 seconds. pause, spray directly onto the surface of the particle filter at a pressure of 6-8 bar. To moisten the entire surface as much as possible, rotate the probe and move it back and forth during cleaning. Allow the cleaner to work for approx. 15 minutes. Then rinse the particulate filter with the full amount of Pro-Line diesel particulate filter rinse (500 ml). This cleaning is also carried out with the DPF pressure cup gun at the same intervals as with the cleaning fluid. The cleaning dissolves the soot and distributes it in the particle filter to such an extent that it can be burned with normal regeneration. After reinstalling the sensor, the service company or workshop must initiate a regeneration according to the manufacturer's specifications.
Anwendbarkeit
BMW 5 (F10) 530 d xDrive / 2011-03 - 2016-10
Verwendungsnummern
4100420051715
4100420028205
500ml
5171
DPF
DPF Spoelen
DPF Reiniger
reiniger dpf
dpf cleaner
dpf systeem reiniger
Pro-Line Dieseldeeltjesfilterspoeling
Pro-Line
Dieseldeeltjesfilterspoeling
ProLine
Pro Line
Dieseldeeltjes
filter spoeling
filterspoeling
Diesel deeltjes
500 ml
Bewertungen
0,0/5
0
0
0
0
0